🎉 Up to 70% Off Selected ItemsShop Sale
502SSD mSATA Solid State Drive Shield
502SSD mSATA Solid State Drive Shield
This shield converts one UP USB Host Port to a high capacity mSATA SSD Drive (up to 1TB), Dual USB 2.0 Host Ports and 802.11b/g/n WiFi w/Soft-AP Mode support. Coupled with the high performance UP with Quad Core CPU, the 502SSD creates a low cost, embedded network storage device. The 502SSD includes one shield (Hard Drive not included), WiFi antenna, USB-A to microUSB-B patch cable and mounting hardware for connection to the UP board.
Features
- Two USB2.0 Type A (5V @ 1.5A power) for additional USB expansion
- PL2571 Controller and mSATA Socket for up to 1TeraByte on-board Storage
- GWF-3M08 Module (Based on Ralink RT5370) provides 802.11b/g/n for up to 150Mbps. On-Module IPEX connector allows for optimal antenna placement
- DS1339 Real Time Clock with 16mm Coin Cell Backup and Alarm
- 1-Wire DS18B20 Temperature Sensor mounted below SSD to monitor health of drive. Additionally the DS18B20 has a unique 64-Bit ID that can be used to identify the shield for advanced Asset Management
- Wide-Input 5V @ 10A powers all peripherals plus the UP board. Additional 5-Pin Header can be used to power the Pi Foundation 7" Touch LCD w/I2C
502SSD mSATA Solid State Drive Shield
This shield converts one UP USB Host Port to a high capacity mSATA SSD Drive (up to 1TB), Dual USB 2.0 Host Ports and 802.11b/g/n WiFi w/Soft-AP Mode support. Coupled with the high performance UP with Quad Core CPU, the 502SSD creates a low cost, embedded network storage device. The 502SSD includes one shield (Hard Drive not included), WiFi antenna, USB-A to microUSB-B patch cable and mounting hardware for connection to the UP board.
Features
- Two USB2.0 Type A (5V @ 1.5A power) for additional USB expansion
- PL2571 Controller and mSATA Socket for up to 1TeraByte on-board Storage
- GWF-3M08 Module (Based on Ralink RT5370) provides 802.11b/g/n for up to 150Mbps. On-Module IPEX connector allows for optimal antenna placement
- DS1339 Real Time Clock with 16mm Coin Cell Backup and Alarm
- 1-Wire DS18B20 Temperature Sensor mounted below SSD to monitor health of drive. Additionally the DS18B20 has a unique 64-Bit ID that can be used to identify the shield for advanced Asset Management
- Wide-Input 5V @ 10A powers all peripherals plus the UP board. Additional 5-Pin Header can be used to power the Pi Foundation 7" Touch LCD w/I2C
$3,603.82
Original: $12,012.75
-70%502SSD mSATA Solid State Drive Shield—
$12,012.75
$3,603.82Description
502SSD mSATA Solid State Drive Shield
This shield converts one UP USB Host Port to a high capacity mSATA SSD Drive (up to 1TB), Dual USB 2.0 Host Ports and 802.11b/g/n WiFi w/Soft-AP Mode support. Coupled with the high performance UP with Quad Core CPU, the 502SSD creates a low cost, embedded network storage device. The 502SSD includes one shield (Hard Drive not included), WiFi antenna, USB-A to microUSB-B patch cable and mounting hardware for connection to the UP board.
Features
- Two USB2.0 Type A (5V @ 1.5A power) for additional USB expansion
- PL2571 Controller and mSATA Socket for up to 1TeraByte on-board Storage
- GWF-3M08 Module (Based on Ralink RT5370) provides 802.11b/g/n for up to 150Mbps. On-Module IPEX connector allows for optimal antenna placement
- DS1339 Real Time Clock with 16mm Coin Cell Backup and Alarm
- 1-Wire DS18B20 Temperature Sensor mounted below SSD to monitor health of drive. Additionally the DS18B20 has a unique 64-Bit ID that can be used to identify the shield for advanced Asset Management
- Wide-Input 5V @ 10A powers all peripherals plus the UP board. Additional 5-Pin Header can be used to power the Pi Foundation 7" Touch LCD w/I2C
